phimsex, vlxx, porn, xxx, xvideos, free porn, pornhub, xnxx, jav, jav uncensored, 無修正, jav censored, supjav, 成人 影片, 18av, a片, 成人片, porno
Genesys+ – 200 Vdc 5 kW, 10 kW and 15 kW models added
Power Supplies, Programmable PSUs

Genesys+ – 200 Vdc 5 kW, 10 kW and 15 kW models added

TDK-Lambda announces the introduction of three 0 – 200 Vdc, 19” wide, rack mount, programmable DC power supplies. These most recent additions to the GENESYS+™ series are available with output power levels of 5 kW, 10 kW and 15 kW. The 200 V 0-25 A, 0-50 A and 0-75 A models are able to provide an optimised voltage range for testing solar panels, semiconductor fabrication, battery charging, DC motor control, heaters and process control applications.

As with all the other models in the GENESYS+™ series, the new 0 – 200 Vdc models are capable of operating in constant voltage, constant current and constant power modes. Up to six power supplies can be connected in parallel with an advanced master/slave system that provides dynamic load response and ripple and noise characteristics comparable with that of a single power supply. The supplies can be ordered with a choice of a 170 to 265 Vac, 342 to 460 Vac or 342 to 528 Vac three-phase input.

The G200-25 (5 kW 1U), GSP200-50 (10 kW 2U) and GSP200-75 (15 kW 3U) models share a common width of 423mm and depth of 441.5mm. A blank front panel option (with no metering or front panel control functions) is available where user access is not required or needs to be restricted. Snap-on dust filters can also be added to restrict airborne contamination.

Programming is standardised across the entire GENESYS+™ series by either utilising the front panel controls, remotely via LAN (LXI 1.5), USB 2.0 and RS232/485 communications or by using the isolated analogue control and monitoring (0-5 V, 0-10 V) which are provided as standard.  Optional interfaces include a choice of GPIB (IEEE488.2) and the Anybus CompactCom interface platform for EtherCAT, Modbus-TCP and other interface options as they are released. Software drivers, a waveform creator and a virtual front panel GUI are provided in the software package. Safety features are standard in all GENESYS+™ power supplies, providing Safe/Auto Re-Start, Last Setting Memory and built-in protection functions.

The five-year warranty series is safety certified to IEC/EN/UL 60950-1 (61010-1 pending), CE marked to the Low Voltage, EMC and RoHS Directives and compliant to the industrial IEC/EN 61203-3 standard for conducted EMI, radiated EMI and EMC immunity.

For more information please contact Accutronics or visit the TDK-Lambda website.