phimsex, vlxx, porn, xxx, xvideos, free porn, pornhub, xnxx, jav, jav uncensored, 無修正, jav censored, supjav, 成人 影片, 18av, a片, 成人片, porno
Accutronics

The RadMan 2LT and RadMan 2XT Radiation Monitors are warning devices for the protection of people who work in areas where increased levels of electromagnetic radiation are present. Broadcasting, telecommunications and radar antennas are sources of strong electromagnetic fields. The device is worn on the body and warns its user in good time before the permitted limit values are exceeded.


Display and warning signals

The actual field exposure level is indicated in six steps from 5% to 200% by LEDs. The percentages refer to the proportion of the power density limit value specified in a safety standard. If the field exposure level exceeds 50% of the limit value, the device vibrates and emits a loud alarm tone. There is also a bright light in the top part of the RadMan 2 that can be easily seen from various angles. The light flashes red in time with the alarm signal. A second, more persistent alarm sounds when the 100% threshold is exceeded, warning the user to leave the danger area.


Standard compliance by means of shaped frequency response
.

The permitted limit values specified in the standards vary according to the frequency. Weighting filters in the sensors of the RadMan 2 simulate the frequency response of the standard. They ensure that the alarm thresholds are correct over the entire frequency range. Settings are not necessary.

Minimal body effect

Personal monitors are generally worn on the person. RadMan 2 is supplied fitted with a suitable attachment and RF absorber that allows it to be fixed easily to a harness or belt. The RF absorber reduces the signal reflections caused by the body which would otherwise affect the result displayed by the monitor. If needed, the RadMan 2 can be released from the attachment with one hand in order to determine the field exposure away from the body with an isotropic directional characteristic.

RadMan 2LT

  • RF Exposure indication via 6 LEDs showing 5/10/25/50/100/200% of Standard
  • E-Field sensor – 50 MHz to 8 GHz
  • H-Field sensor – 50 MHz to 1 GHz
  • Signal Detection: RMS over 1 second
  • Data Logger
    • 2 880 events (48 hours)
    • 1 minute logging intervals
  • Functional sensor test
  • 800 hours operating on 2xAA NiMH rechargeable batteries

RadMan 2XT

  • RF Exposure indication via 6 LEDs showing 5/10/25/50/100/200% of Standard
  • E-Field sensor – 900 kHz to 60 GHz (ICNIRP model)
  • H-Field sensor – 27 MHz to 1 GHz (ICNIRP model)
  • Signal Detection: RMS, switchable over 1 s or 30 ms (pulse mode)
  • Data Logger
    • 100 000 events
    • 1 second to 6 minute logging intervals
  • Functional sensor test and RF detection mode
  • 800 hours operating on 2xAA NiMH rechargeable batteries

For more information, the datasheet is available here, or visit the RadMan 2 page on the Narda-STS site.